Carver

• Included: Four 33’ straps that pass over and under the unit with buckles for fastening
• Included: Reinforcement kit to add extra protection in areas with sharp edges.
• Included: Matching storage bag.

ADCO

• Attached straps and buckles to hold the cover in place.
• Zipper entry panels along side wall allow for entry during storage.
• Reinforced corners reduce wear.
• Vents to insure breathability and prevent billowing.
• Storage bag included. 

Class C

Carver

• 18’-40’: Two 96” zippers installed vertically along the passenger side wall.
• 42’-46’: Three 96” zippers installed vertically along the passenger side wall.
• Attached buckle and 12’ strap beside each zipper along the side wall.
• Included: Four 40’ straps that pass over and under the unit with buckles for fastening.
• Included: Reinforcement kit to add extra protection in areas with sharp edges.
• Included: Matching storage bag.

ADCO

• Zipper entry panels along the side wall to access front and rear doors.
• Attached straps and buckles to hold the cover in place.
• Reinforced corners reduce wear.
• Vents to insure breathability and prevent billowing.
• Storage bag included. 

Fifth Wheel

Carver

• 20’-30’:  Two 108” zippers installed vertically along the passenger side wall.
• 32’-44’: Three 108” zippers installed vertically along the passenger side wall.
• Attached buckle and 12’ strap beside each zipper along the side wall.
• Included: Four 40’ straps that pass over and under the unit with buckles for fastening.
• Included: Reinforcement kit to add extra protection in areas with sharp edges.
• Included: Matching storage bag.

ADCO

• Zipper entry panels along the side wall to access front and rear doors.
• Attached straps and buckles to hold the cover in place.
• Reinforced corners reduce wear.
• Vents to insure breathability and prevent billowing.
• Storage bag included. 

Fifth Wheel Toy Hauler

Carver

• 20’-30’:  Two 108” zippers installed vertically along the passenger side wall.
• 32’-44’: Three 108” zippers installed vertically along the passenger side wall.
• Two 96” zippers for back door access.
• Attached buckle and 12’ strap beside each zipper along the side wall.
• Included: Four 40’ straps that pass over and under the unit with buckles for fastening.
• Included: Reinforcement kit to add extra protection in areas with sharp edges.
• Included: Matching storage bag.

ADCO

• Zipper entry panels along the side wall to access front and rear doors.
• Attached straps and buckles to hold the cover in place.
• Reinforced corners reduce wear.
• Vents to insure breathability and prevent billowing.
• Storage bag included. 

Pop-up/Folding Tent Trailer

Carver

• Included are two 33’ tie down straps with buckles that allow you to tighten them.
• Included: Reinforcement kit to add extra protection to areas with sharp edges
• Matching storage bag.

ADCO

• Attached straps and buckles to hold the cover in place.
• Reinforced corners reduce wear.
• Vents to insure breathability and prevent billowing.
• Storage bag included. 

Hi-Lo

ADCO

• Attached straps and buckles to hold the cover in place.
• Reinforced corners reduce wear.
• Vents to insure breathability and prevent billowing.
• Storage bag included.

Travel Trailer Toy Hauler

Carver

• 10’-22’: Two 96” zippers installed vertically along the passenger side wall.
• 24’-40’: Three 96” zippers installed vertically along the passenger side wall.
• Attached buckle and 12’ strap beside each zipper along the side wall.
• Included: Four 40’ straps that pass over and under the unit with buckles for fastening.
• Included: Reinforcement kit to add extra protection in areas with sharp edges.
• Included: Matching storage bag.

Travel Trailer

Carver

• 10’-22’: Two 96” zippers installed vertically along the passenger side wall.
• 24’-40’: Three 96” zippers installed vertically along the passenger side wall.
• Attached buckle and 12’ strap beside each zipper along the side wall.
• Included: Four 40’ straps that pass over and under the unit with buckles for fastening.
• Included: Reinforcement kit to add extra protection in areas with sharp edges.
• Included: Matching storage bag.

ADCO

• Zipper entry panels along the side wall to access front and rear doors.
• Attached straps and buckles to hold the cover in place.
• Reinforced corners reduce wear.
• Vents to insure breathability and prevent billowing.
• Storage bag included. 

Slide-in Truck Camper

ADCO

• Zipper entry panels along the side wall to access front and rear doors.
• Attached straps and buckles to hold the cover in place.
• Reinforced corners reduce wear.
• Vents to insure breathability and prevent billowing.
• Storage bag included. 

Carver 8 oz. Performance Poly-Guard

Made in the USA! This fabric is a true loom woven polyester, making it much harder to tear than traditional covers. Treated with a marine grade water repellency and state of the art UV and mildew inhibitors, this cover is sure to protect your RV from the elements. Constructed of 600 denier filament polyester yarns. Easy to handle and extremely strong.  Available in a Silver Cloud color. 5 year warranty.

DuPont Tyvek Designer Series

DuPont Tyvek offers protection against fierce weather climates and provides optimum protection against the sun’s harsh rays. High performance polypropylene sides insure maximum breathability and virtually eliminate mold and mildew.  Available in two-tone Tan.  2 year warranty.

SFS AquaShed Designer Series

Ideal for climates with intense moisture and moderate sun. High performance polypropylene sides insure maximum breathability and virtually eliminate mold and mildew. The triple layer SFS AquaShed top panel beads water on contact.  Available in two-tone Gray.  2 year warranty.

1. Place the rolled cover on the front end of the roof.
2. Roll the cover to the back end of the roof.
3. Working from front to back, spread the cover to the side edges of the roof.
4. From the ground, use a stepladder and work from front to back to pull the cover down over the sides of the RV.  Adjust the fit as necessary.
5. Before securing the elasticized hems, you may wish to use the included reinforcement/repair kit to add protection to stress areas.
6. Secure the elasticized hems under the front and rear end of the RV.
7. Using the 40-foot tie down straps (if provided), secure the cover and adjust to create a snug fit. Most covers also have an adjustable strap system attached to the front of the unit to provide a more secure fit.
8. Most covers have attached tie down straps at the bottom sidewalls of the cover.  Slide straps under the unit and connect on the opposite side.

See ADCO’s how to install your RV cover video for more info.

For more info on installing your RV cover, see the manufactures’ instructions.

Installing a Carver RV cover

Installing an ADCO RV cover

How to Prolong the Life of Your Cover

• Avoid letting water or snow stand on the cover.
• Always tie cover down securely.
• Before installing the cover, take the precaution of padding areas that could snag or tear; such as mirrors and awning mounts.
• Allow the cover to dry thoroughly before folding or storage.

Cleaning Your RV Cover

RV covers may be cleaned by spraying with a hose and/or using a solution of mild soap and water, and a soft brush.  Rinse with hose and allow to dry completely.

See our PDF on How to prolong the life of your Carver RV cover.